Entries are grouped by area, and each one quotes the message as the app shows it.
Signing in
Signup says "Hoppflow accounts are by invitation right now."
Signup is open only to people who are invited or on the access list.
Select Join Waitlist to ask for access, or ask someone in your company to invite you to their workspace. See Get access and sign in.
Signup says "An account with this email already exists."
You already signed up with this email, possibly with Google.
Sign in with that email instead. If you signed up with Google, use Google, or set a password to use the email path.
Sign-in says "Please verify your email address before signing in."
You have not opened the verification link Hoppflow emailed you.
Select Resend verification email, then open the newest link in your inbox. Hoppflow confirms with "If that email is registered and unverified, a new verification link is on its way. Check your inbox."
The verification link says it is invalid or has expired
The message reads "Verification link is invalid or has expired. Try signing up again." You can also see "Verification token has expired or already been used." or "Missing verification token." The link was already used, has expired, or was copied incompletely.
Request a new verification email and use the newest link only.
Sign-in says "Invalid email or password."
The email or password does not match.
Check the email for typos, or reset your password from the sign-in page. If you signed up with Google, sign in with Google.
Sign-in says "Too many sign-in attempts. Please wait a few minutes and try again."
Hoppflow slowed sign-in after several failed attempts from your network.
Wait a few minutes, then try again with the right password, or reset it.
Sign-in says the account is temporarily locked
The message reads "Sign-in for this account is temporarily locked after repeated failed attempts." Repeated failed attempts locked the account to protect it.
Check your email, reset your password, or contact support and Hoppflow will lift the lock.
Sign-in says "Invalid authentication code. Try again or use a recovery code."
Your account uses two-factor authentication and the code was wrong or had expired.
Enter the current code from your authenticator app. If you no longer have the app, use one of your recovery codes. See Secure your account.
Google sign-in was blocked
The Google prompt was cancelled, or this Google account does not have a Hoppflow invitation yet.
Select Try signing in again, or sign in with your email and password. If the attempt expired instead, you see That sign-in attempt didn't complete. Start again from the sign-in page rather than the back button.
The password reset link is invalid
The link is missing part of its address, has expired, or was already used.
Select Request a new link and use the newest email.
An invite link shows "Invite not found"
The page says "This invite link is invalid or has expired."
Ask the person who invited you to send a new invite. Signing up on your own works only if your email is on the access list.
Sign-in says "This account has been disabled."
The account was disabled.
If you think that is a mistake, reply to any Hoppflow email and the team will take a look.
Sign-in says "We could not reach the server to check that."
Your browser could not reach Hoppflow.
Check your internet connection, then try again. If you see "We could not start your session. Please try again.", sign in again.
Setting up a workspace
Setup says "New workspaces are by invitation right now."
Creating your own workspace needs an email on the access list. You can still join any workspace you are invited to.
Select Join Waitlist to ask for your own workspace, or ask a teammate to invite you to theirs.
Setup says "Please verify your email address before creating a workspace."
Your email is not verified yet.
Open the verification link Hoppflow emailed you, then try again.
Setup says "I couldn't create your workspace just now."
Creating the workspace failed, or the connection dropped while it was being created.
Check your internet, then try again. If Hoppflow says it could not tell whether the workspace was created, select Try creating it again.
Setup says "You're signed out, so that answer is not saved yet."
Your session ended during setup.
Select Sign in again. Setup picks up from where you were.
Setup says "I could not save that answer."
A setup answer did not save. The message adds "It is still here, nothing is lost."
Press Try again, or move on. Hoppflow keeps trying in the background.
Setup says "An invite email could not be sent."
The invite email failed during setup.
Copy the join link shown and share it with your teammate directly.
Setup says "I couldn't finish setting up."
The last setup step failed. The message adds "Nothing you taught me is lost."
Try again in a moment, or go into the workspace and Hoppflow finishes in the background. See Set up your workspace.
Uploading documents
An upload says "... is not a file the brain reads."
The file type is not supported for upload.
In Upload documents, use PDF, Word, PowerPoint, CSV, text or Markdown. Excel, HTML and image files are refused there. See Add documents.
An upload says "The most a file can be is 10 MB."
The file is larger than the upload limit.
Split the file, or upload a smaller copy, such as a PDF without embedded images.
An upload says "Not uploaded: your plan's document limit is reached."
Your workspace has used its document allowance for this plan period. The upload queue stops and an upgrade window opens.
Wait for your plan to renew, remove a document you no longer need, or upgrade. See Credits and usage.
An upload says "Upload failed. Check your connection, then try again."
The upload did not reach Hoppflow.
Check your connection and retry the upload.
A document shows "Not indexed: the brain could not read this file."
The file is damaged or could not be opened.
Check that the file opens on your computer, then upload it again.
A document shows "Not indexed: too little readable text was found"
The file is usually a scan or an image-only PDF, so there is almost no text for the brain to answer from.
Upload a text PDF or the source file instead.
A document shows "Held"
The file is waiting before it reaches the brain. The status names the reason, for example "Sensitive information classification has not completed" or "Waiting for a relevance review".
The status says who can release it: a workspace admin, the workspace owner, or an authorised reviewer. Ask that person.
A preview says "This PDF is protected by a password, so it cannot be shown here."
The preview cannot open a password-protected PDF.
Download the file and open it with its password.
A chat attachment says "Too little readable text."
A file you attached in chat is a scan or is empty.
If it is a scan, attach a text PDF or the source file.
Chat says "Up to 10 attachments per message."
You attached more files than one message allows.
Send the rest in a second message.
Answers and citations
The brain says "I don’t have this grounded in your company yet, but I can still help."
The brain found nothing in your company that answers the question. The reason line says why, for example the document is not indexed yet, or your access does not cover the material.
Add the document, wait for reading to finish, or ask a workspace owner to share the material. You can also choose Answer from general knowledge or Search the web. See Sources and citations.
A citation shows "Source unavailable"
The card says "This source can't be shown here." The source was deleted, withdrawn or withheld, or you do not have access to it. These cases look the same on purpose.
Ask the owner of the source whether you should have access. If the answer matters, ask again so it uses sources you can open.
A citation says "This source changed after the answer was written"
The cited record was edited after the answer, so the passage may no longer hold.
Ask the question again to get an answer from the current version.
An answer says "Retrieval is running in a limited mode right now."
The brain answered with reduced search.
Treat the answer as a draft and check its citations. Ask again later for a full answer.
Chat says "The brain couldn’t reach its model just now."
The language model behind the brain did not respond.
Select Try again. If it keeps happening, wait a minute and retry.
/ask Audit the answer above for claims it cannot support and for citations that have gone stale. Work from company sources only, and flag any source that has changed or is no longer there. Do not fill the gaps with general knowledge.Give me a corrected answer with current citations, followed by a short list of anything no current source supports.
Connections and AI clients
Connecting says "Your browser blocked the sign-in window."
A popup blocker stopped the tool's sign-in window.
Open it in a new tab, or allow popups for Hoppflow and try again.
Connecting says "The sign-in expired or was cancelled. Please connect again."
You closed the tool's sign-in, or waited too long.
Start the connection again from the tool's card.
Connecting says the connection "needs to be renewed by an administrator"
The full message reads "Hoppflow's connection to this tool needs to be renewed by an administrator. Nothing was connected." The tool's connection on Hoppflow's side needs renewing.
Ask a workspace admin, or contact Hoppflow.
Connecting says "... via MCP needs setup by an admin before anyone can connect it."
This remote MCP tool must be set up for the workspace first.
Ask a workspace admin to set it up, then connect it.
A connection says "The access has expired. Reconnect to resume."
The tool's sign-in expired. You can also see "The connection was rejected. Reconnect to resume." or "A permission is missing. Reconnect to grant it."
Reconnect the tool and grant the permissions it asks for. See Disconnect and reconnect a tool.
A connection says "You do not have access to change this. Ask a workspace admin."
Your role cannot change this connection's settings.
Ask a workspace admin to make the change, or to give you a role that can.
Sharing says "Could not share it just now. It is still private to you."
Sharing the connection with the workspace failed.
Try again. The connection stays private until sharing succeeds. See Private and shared connections.
The brain is not using a connected tool
Content from a connected tool reaches the brain only once you turn on Add to company brain and ingest it. It is off by default.
Turn it on, choose the items, and select Ingest now or set a frequency. See Choose what the brain reads.
Creating a grant says "Your current workspace role cannot delegate"
You tried to give an AI client a scope your own role does not hold.
Create a narrower grant, or choose a workspace where your role allows it. See Connect an AI client.
An AI client says "This MCP grant is not active."
The grant expired or was revoked.
Create a new grant in Settings and reconnect the client.
An AI client says "Your current workspace role no longer permits this grant."
Your role changed after you created the grant.
Revoke the grant and create a narrower one.
Automations
Running says "Activate this automation before running it."
The automation is still a draft.
Pass a dry run, then activate it. See Test, run and cap an automation.
Activating says "A passing dry run is required for this draft."
A draft cannot be activated until a test run succeeds.
Run a dry run and fix anything it flags.
Running says "This automation is paused. Resume it before running it."
Someone paused the automation.
Resume it, then run it.
Activating says "Resolve the flagged issues, then activate."
The builder's checklist found problems, for example "Add a trigger. Every automation needs one."
Open the automation in the builder and fix each flagged step. See Build an automation.
Activating says "Only its owner can activate this automation"
Only the automation's owner can activate or change it.
Ask the owner. You can still test the saved version.
Running says "Confirm the Credits this automation may use per run before it runs."
The automation has no confirmed per-run Credits cap.
Set and confirm the cap in the builder.
Running says "Automations are not authorized to run in this workspace."
Nobody has authorized automations for the workspace yet.
Ask a person who can manage the team to authorize them. See Triggers and schedules.
A run stopped with "The automation budget was reached."
The run hit the budget set for the automation.
Review its budget before running it again.
A run stopped with "The workspace ran out of Credits, so the run stopped."
The workspace has no Credits left.
The owner can add Credits in Settings > Plan & billing, then run the automation again.
A run says "The automation needs your approval to read connected sources."
The automation reads a connected tool and you have not consented to that.
Review its connected-read consent and run it again.
A step became a task instead of running
The automation owner lacks a connection the step needs. Scheduled runs also cannot read personal MCP connections, because no member is behind the run.
Have the owner connect the tool, or use a shared connection.
Approvals
An approval says "This action cannot be sent yet"
Something would make the send fail. The message lists it, for example the tool is not connected, its connection expired, or the recipient is on the do-not-contact list.
Reconnect the tool or fix the listed blocker, then approve. See Review and approve.
An approval says "You raised this, so you cannot also approve it."
The person who raised an item cannot approve it as well.
Ask someone else with approval rights. You can still reject it yourself to withdraw it.
An approval says "The proposed effect changed after it was reviewed."
The draft changed while you had it open. The message asks you to refresh and review it again.
Refresh the page and review the current version.
A draft says "The recipient is fixed when the draft is made."
You cannot change who a draft goes to.
Reject it and ask for a new draft to send it elsewhere.
A draft says "Attachments can only be removed."
You cannot add or replace a file on a draft.
Reject it and ask for a new draft with the right file.
An item says "Withheld: rests on sources you cannot access."
The item draws on records outside your access.
Ask someone who holds that access to review it.
Approving says "Couldn't approve that just now. Please try again."
The approval did not go through.
Try again. Nothing is approved until it succeeds.
Research and market watch
Research says "Couldn't plan this research. Please retry."
Hoppflow could not build the research plan.
Retry. If the server says there are too many AI requests for the workspace, wait a short while first. See Run a research report.
A research run says "This run seems to have stalled."
The research run stopped making progress. A failed run says "This research run failed."
Start the research again.
Research says "No reliable public sources were found to research"
The web search found nothing reliable for the question.
Rephrase the question, or narrow it.
Research says "No matching company records supported an answer."
Your company records had nothing on the question.
Try naming a project, or add the relevant records first.
Export says "Couldn't build the PDF just now. The Markdown export still works."
The PDF export failed.
Export to Markdown, or try the PDF again later. See Read, share and export reports.
Sharing says "This is a personal brief. It is only visible to you, so it can't be shared."
Personal briefs stay with the person who made them. A report that draws on restricted records also cannot be shared beyond readers who hold that access.
Share the findings another way, or run a report the people you want to share with can read.
Watching a topic says "Upgrade to watch more."
Your plan's watched topic allowance is used. Watched topics are not included on Free, and the message for that case says they are not included on your plan.
Upgrade, or stop watching a topic you no longer need. See Watch a topic.
Meetings and recording
Recording says "We could not use the microphone."
The browser has no permission to use your microphone.
Allow microphone access in your browser, then try again.
Recording says "The tab's sound was not shared, so nothing was recorded."
You shared a tab without its audio.
Start again, pick the tab where your meeting runs, and keep Also share tab audio switched on.
Recording says "This browser cannot record audio."
Your browser does not support recording.
Use Chrome, Edge, or Safari 18.4 and above.
A meeting asks "A recording from earlier was not fully saved. Finish saving it?"
The upload stopped before the recording was saved. The recording stays on the device and browser that made it.
Open the meeting on the same device and browser, and finish saving it. See Meetings, prep and recording.
A recording says "There are not enough Credits to transcribe this recording"
Transcription uses pooled workspace Credits, and there are not enough. Nothing was charged and the audio is saved.
Add Credits, then finish the transcript.
A recording says "This recording was not transcribed within 72 hours, so its audio was deleted."
Audio is never kept longer than 72 hours without a transcript.
The audio cannot be recovered. Transcribe future recordings sooner.
A meeting says "Not recorded: someone in this meeting declined to be recorded."
A participant declined. Once anyone in a meeting objects, that meeting's notes, transcripts and brief are kept out of Ask and prep.
Nothing to fix. Take notes by hand for this meeting.
Recording says "Recording is turned off for this workspace."
An owner or admin switched recording off, or your role cannot record.
Ask a workspace owner or admin.
Cockpits
A cockpit says "An admin installs this"
Only a workspace owner or admin can install a cockpit.
Ask an owner or admin. See Install and manage a cockpit.
Installing says "Cockpits are part of every plan. Choose a plan to install one."
The workspace has no active plan.
The owner chooses a plan in Settings > Plan & billing.
Installing says "Cockpits cannot be installed here right now."
A note above the cockpit list gives the reason, for example the workspace is paused or still holds settings from an earlier release.
Follow the note. If it says Hoppflow is clearing earlier settings, wait for that to finish.
A cockpit says "This cockpit is archived."
Older cockpits can no longer be newly installed. Ones you already have keep working.
Install the current cockpit from Browse cockpits instead.
Installing says "Could not install just now. Nothing was changed. Try again."
The install did not finish.
Try again.
Billing and Credits
Work stops with "Your workspace is out of Credits."
The workspace has no Credits left, so work that uses Credits has stopped.
The owner can buy a pack or change plan. See Credits and usage.
Work stops because you reached the limit of the free period
The Free period's allowance is used up.
Upgrade to continue. See Plans and Free.
Work stops because this month's Credits are used
The workspace reached its monthly safety limit. Credits reset at the start of the next month.
Wait for the reset, or write to Hoppflow to raise the limit sooner.
Work stops because you reached your monthly limit
You used the monthly Credits limit your workspace owner set for you.
Ask the owner to raise it.
Hoppflow says it is taking a short pause
The same request ran many times in a few minutes, so new work is paused for a short while.
Check for a loop, such as an automation that triggers itself, then try again in a few minutes.
The workspace says "This workspace is locked until billing is resolved."
There is no active plan, or a payment failed and the grace period ended.
The owner chooses a plan or updates the payment method in Settings > Plan & billing. See Manage your plan and billing.
A banner says "Your last payment did not go through."
The card payment failed. Everything keeps working until the date shown, then the workspace locks.
The owner updates the payment method before that date.
Checkout says "We could not open the payment form, and nothing was charged."
The payment form did not load.
Try again in a moment. If it keeps happening, email support@hoppflow.com and Hoppflow will send you a payment link.
Choosing a plan says "Your fourteen free days have already been used."
The Free period can be used once per person. The message continues "Choose a plan to carry on."
Choose Plus or Pro.
Inviting says "Every seat on this plan is taken."
All seats are in use. The message continues "Add a seat in Billing to invite another person."
The owner adds a seat in Settings > Plan & billing, then you can invite.
Access and members
A page says "You don't have access to ..."
The message continues "Your role in this workspace can't open" the area you chose, and asks you to request access or ask a workspace admin.
Select Request access. Hoppflow lets your workspace admins know. See Roles and permissions.
The brain says "There is material on this in the workspace, but your access doesn't cover it."
The brain found relevant records you are not allowed to read.
Ask a workspace owner to share it with you. See Control who sees an item.
Changing access says "You cannot grant access you do not hold yourself."
You tried to give someone access your own role does not include. Roles follow the same rule.
Ask the owner or an admin who holds that access.
Changing your role says "You cannot change your own access."
Members cannot edit their own role.
Ask another admin or the owner.
Deleting a role says "This role is assigned to members. Reassign them first."
A role cannot be deleted while members hold it.
Move those members to another role, then delete it.
Leaving says "Owners cannot leave. Transfer ownership first"
A workspace always needs an owner.
Transfer ownership in Settings > Team > Roles & access, then leave. See Manage members and ownership.
A transfer says "A transfer is already pending for this workspace."
An ownership transfer has been started and not finished.
Finish or cancel the pending transfer first.
Inviting says "This person's access to this workspace is suspended"
The person is suspended, so they cannot be invited again.
Restore their access from the member list instead.
Deleting says "You can't delete your only active workspace."
You need at least one active workspace.
Reopen an archived workspace or create another first. See Workspaces and settings.
Deleting says "Release all legal holds before deleting this workspace."
An open legal hold blocks deletion.
Release the holds first, then delete.
Report a bug
-
Open the account menu
Select your avatar to open the Account menu.
-
Choose Report a bug
Choose Report a bug, describe what happened, and submit the report.
-
Follow your report
Track what happens to it under Settings > Your reports.